If the "Found New hardware Wizard" does not appear on
the screen:
Shut down your PC and connect your Arcom Board to your
PC.
Boot your PC and follow the instructions for your
Operating System.
If the "Found New hardware Wizard" appears on the
screen:
Follow instructions for your Operating System.
Windows XP Installation:
On
the “Found New Hardware Wizard”:
•Select “Install from a
list or specific location (Advanced).
•Click Next.
•Select “Search for the
best driver in these locations”.
•In “Optional Search
Location” Select “Specify a location” and
chose the location to which you have extracted the drivers.
•Click Next.
•Click Finished.
•Reboot your PC when
asked.
Windows 2000 Installation:
On the “Found New Hardware
Wizard”:
•Click Next.
•Select “Search for a
suitable driver for my device (recommended)”.
•In “Optional Search
Location” Select “Specify a location” and
chose the location to which you have extracted the drivers.
•Click Next.
•Click Next.
•Reboot your PC when asked
Usage:
Usage of these drivers is beyond
the scope of this document, however, the Arcom PCI Windows 2000/XP drivers are directly
compatible with the previous NT4 ones. A help file Arcompci.hlp that describes
function usage, is included in this archive. This should be read in conjunction
with the appropriate board manual.
Contacting Arcom
Technical Support
If you have any problems or
questions regarding the above information please email
Arcom Technical Support.
UK & Europe : euro-support@arcom.com
US & Pacific : us-support@arcom.com
Further contact details are
available via our website: